Fiber Optic Splice Enclosures

Product Detail

Horizontal Fiber Optic Splice Enclosure













1. Scope of application

This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation. The scope of application is: aerial, underground, pipeline, handhole. The ambient temperature ranges from -40 to 65?.

 

2. Basic structure and configuration 

2.1 Dimension and capacity

Outside dimension (LxWxH)	590x320x215 (mm)
Weight (excluding outside box)	7300g-9600g
Number of inlet/outlet ports	4 (pieces) on each side (total 8 pieces)
Diameter of fiber cable	F12—F41 (mm)
Capacity of FOSC	Bunchy: 24—648 (Cores) Ribbon: up to 1944 (Cores)

2.2 Main components

No.		Name of components	Quantity	Usage	Remarks
1		Housing	1 set	Protecting fiber cable splices in whole	Internal diameter: 500x205 (mm)
2		Insert plate	2 pairs	Fixing the housing	220x80x35(mm)
3		Fiber optic splice tray (FOST)	Max 10 pcs (bunchy Max 9 pcs (ribbon)	Fixing heat shrinkable protective sleeve and holding fibers	Suitable for: Bunchy:24,36,48,72(cores) Ribbon:6,12,18 (pieces)
4		Fixing bracket	1 set	Fixing fiber cable and reinforced core
5		Foundation	1 set	Fixing FOST
6		Seal fitting	1 set	Sealing between FOSC cover and FOSC bottom
7		Port plug	8 pieces	Sealing empty ports
8	Pressure testing valve		1 set	After injecting air, it is used for pressure testing and sealing testing	Configuration as per requirement
9	Earthing deriving device		1 set	Deriving metallic components of fiber cable in FOSC for earthing connection	Configuration as per requirement

 

2.3 Main accessories and special tools

No.	Name of accessories	Quantity	Usage	Remarks
1	Heat shrinkable protective sleeve		Protecting fiber splices	Configuration as per capacity
2	Nylon tie		Fixing fiber with protective coat	Configuration as per capacity
3	Insulation tape	1 roll	Enlarging diameter of fiber  cable for easy fixing
4	Seal tape	1 roll	Enlarging diameter of fiber  cable which fits in with seal fitting	Configuration as per specification
5	Hanging hook	1 set	For aerial use
6	Earthing wire	1 piece	Putting through between earthing devices	To put through as per actual requirement
7	Abrasive cloth	1 piece	Scratching fiber cable
8	Labeling paper	1 piece	Labeling fiber
9	Special wrench	3 pieces	Fixing bolts, tightening nut of reinforced core
10	Measuring paper	1 piece	To measure perimeter, of which the diameter is enlarged with seal tape	To measure perimeter with the corresponding measuring paper
11	Buffer tube	decided by customers	Hitched to fibers and fixed with FOST, managing buffer	Configuration as per requirement
12	Desiccant	1 bag	Put into FOSC before sealing for desiccating air.
13	Rubber hammer	1piece	Knocking in or knocking out inset plate

 

3.  Necessary tools for installation

3.1 Supplementary materials (to be provided by operator)

Name of materials	Usage
Scotch tape	Labeling, temporarily fixing
Ethyl alcohol	Cleaning
Gauze	Cleaning

3.2 Special tools (to be provided by operator)

Name of tools	Usage
Fiber cutter	Cutting off fibers
Fiber stripper	Strip off protective coat of fiber cable
Combo tools	Assembling FOSC

 

3.3 Universal tools (to be provided by operator)

Name of tools	Usage and specification
Band tape	Measuring fiber cable
Pipe cutter	Cutting fiber cable
Electrical cutter	Take off protective coat of fiber cable
Combination pliers	Cutting off reinforced core
Screwdriver	Crossing/Paralleling screwdriver
Scissor
Waterproof cover	Waterproof, dustproof
Metal wrench	Tightening nut of reinforced core

 

3.4  Splicing and testing instruments (to be provided by operator)

Name of instruments	Usage and specification
Fusion Splicing Machine	Fiber splicing
OT DR	Splicing testing
Provisional splicing tools	Provisional testing


Notice: The above-mentioned tools and testing instruments should be provided by the operators themselves.

PAYMENT & SHIPMENT

Packaging











Payment

Standard payment terms: T/T 30% DEPOSIT,70% BANLANCE before shipping.

Online trade assurance order,all is up to you.

More payment terms could be provided(PAYPAL,WESTERN UNION,MONEYGRAM).

Shipping

Delivery time:Generally it is 1-2 days if the goods are in stock,or it is 2-4 days if the goods are not in stock,it is according to quantity.




CERTIFICATION

                          

      CE Certificate                        CE Certificate                              FCC Certificate




                              




Supplier Assessment Certificate                             ISO Certificate

Assessed by:                            





COMPANY INFORMATION







Sales Department 



Workshop



EXHIBITION 





CONTACT US  

If you find our products interested, please fill the below blank space your detailed requirements. OPTFOCUS’s team would offer different solutions to you within 12 hours. Free samples are also available.